CPU BLOCK DIAGRAM
CORE BOARD BLOCK DIAGRAM
PRODUCT DISPLAY
HARDWARE INDEX
| size | Length 44mm x Width 44mm x Height 3.0mm |
| CPU | Allwinner H6 quad-core clocked at 1.5GHz |
| GPU | Mali-720 MP2 GPU |
| Memory | DDR3 comes standard with 1G (2G is optional in batches) |
| memory | eMMC comes standard with 8G (16G/32G/64G optional in batches) |
| Power management | AXP805 supports standby and key on/off |
| Working voltage | Input voltage 5V, maximum power less than 2W (no peripherals connected) |
| Support system | Android 7.1+Linux3.10/Linux5.3/armbian |
| operating temperature | -10 to +75 degrees |
| life | Continuous operation life is more than 5 years |
COMMONINTERFACE
| USB interface | 3 USB interfaces, three independent USB ports, one independent 3.0 |
| UART serial port | 2-way TTL 1.8V, 3-way TTL 3.3v, one of which is Debug |
| GPIO interface | 50 GPIO channels, most of which are reused for other functions |
| PWM interface | 3-way PWM interface |
| RGB display | 1 RGB 888 output supports up to 1920x1080 1080P 60fps |
| HDMI display | 1 HDMI output 1920x1080 1080P 60fps |
| CVBS output | 1 CVBS output |
| PCIE interface | 1 PCIE x1 interface |
| Voice output | 1 channel left and right channel output, 3W power amplifier installed on the bottom panel |
| Voice input | 1 microphone input, no function yet |
| SDIO interface | 2 SDIO interfaces, one for TF card and the other for WIFI |
| IR infrared interface | 1 channel IR infrared receiving interface |
| I2C interface | 3-way I2C interface, two of which are multiplexed with UART3 and headphone detection |
| SPI interface | 1 SPI is reused as a touch screen interface |
| Ethernet 1 | EMAC 10/100M network port |
| Ethernet 2 | GMAC Ethernet PHY interface, multiplexed RGB |
| Output power | Multiple power outputs 1.8V 3.3V |
| System upgrade | Support local USB upgrade |
CORRENT PARAMETER TABLE
| project | smallest | typical | maximum | |
| Current parameters | Voltage | 6.5V | 12V | 15V |
| ripple | -- | 50mV | 120mV | |
| current | 65mA | -- | -- | |
Supply current (No other peripherals connected) | Start-up current | 85mA | 130mA | 315mA |
| play sound | 95mA | 139mA | 172mA | |
| Connect HDMI power-on current | 106mA | 185mA | 305mA | |
Supply current (connected to display screen) | LVDS 1024*600 | 98mA | 232mA | 312mA |
| environment | relative humidity | -- | 65% | 75% |
| working temperature | -10℃ | -- | 75℃ | |
| Storage temperature | -30℃ | -0℃ | 100℃ | |
Note 1: When connecting to an LVDS screen, be sure to select the correct backlight operating voltage of 3.3V, 5V, or 12V. Users should not apply it to peripherals that exceed the corresponding maximum current.
CPU BLOCK DIAGRAM
CORE BOARD BLOCK DIAGRAM
PRODUCT DISPLAY
HARDWARE INDEX
| size | Length 44mm x Width 44mm x Height 3.0mm |
| CPU | Allwinner H6 quad-core clocked at 1.5GHz |
| GPU | Mali-720 MP2 GPU |
| Memory | DDR3 comes standard with 1G (2G is optional in batches) |
| memory | eMMC comes standard with 8G (16G/32G/64G optional in batches) |
| Power management | AXP805 supports standby and key on/off |
| Working voltage | Input voltage 5V, maximum power less than 2W (no peripherals connected) |
| Support system | Android 7.1+Linux3.10/Linux5.3/armbian |
| operating temperature | -10 to +75 degrees |
| life | Continuous operation life is more than 5 years |
COMMONINTERFACE
| USB interface | 3 USB interfaces, three independent USB ports, one independent 3.0 |
| UART serial port | 2-way TTL 1.8V, 3-way TTL 3.3v, one of which is Debug |
| GPIO interface | 50 GPIO channels, most of which are reused for other functions |
| PWM interface | 3-way PWM interface |
| RGB display | 1 RGB 888 output supports up to 1920x1080 1080P 60fps |
| HDMI display | 1 HDMI output 1920x1080 1080P 60fps |
| CVBS output | 1 CVBS output |
| PCIE interface | 1 PCIE x1 interface |
| Voice output | 1 channel left and right channel output, 3W power amplifier installed on the bottom panel |
| Voice input | 1 microphone input, no function yet |
| SDIO interface | 2 SDIO interfaces, one for TF card and the other for WIFI |
| IR infrared interface | 1 channel IR infrared receiving interface |
| I2C interface | 3-way I2C interface, two of which are multiplexed with UART3 and headphone detection |
| SPI interface | 1 SPI is reused as a touch screen interface |
| Ethernet 1 | EMAC 10/100M network port |
| Ethernet 2 | GMAC Ethernet PHY interface, multiplexed RGB |
| Output power | Multiple power outputs 1.8V 3.3V |
| System upgrade | Support local USB upgrade |
CORRENT PARAMETER TABLE
| project | smallest | typical | maximum | |
| Current parameters | Voltage | 6.5V | 12V | 15V |
| ripple | -- | 50mV | 120mV | |
| current | 65mA | -- | -- | |
Supply current (No other peripherals connected) | Start-up current | 85mA | 130mA | 315mA |
| play sound | 95mA | 139mA | 172mA | |
| Connect HDMI power-on current | 106mA | 185mA | 305mA | |
Supply current (connected to display screen) | LVDS 1024*600 | 98mA | 232mA | 312mA |
| environment | relative humidity | -- | 65% | 75% |
| working temperature | -10℃ | -- | 75℃ | |
| Storage temperature | -30℃ | -0℃ | 100℃ | |
Note 1: When connecting to an LVDS screen, be sure to select the correct backlight operating voltage of 3.3V, 5V, or 12V. Users should not apply it to peripherals that exceed the corresponding maximum current.
Product Show Case