main hardware index | |
Size | 40mm length * 30mm width * 2.8mm height |
connection mode | stamp hole |
CPU | rockchip rv1103 mono-core a7+mcu |
NPU | 0.5 TOPS |
Memory | built-in ddr2 64mb |
storage device | standard 128mb for spi flash |
power management | design of discrete power supply |
working voltage | 3.4v-5.5v 400ma or above |
support system | linux5.10.66 |
operating temperature | -10 to + 75 degrees |
common interface of core board | |
usb interface | all the way to otg port |
uart serial port | 4-way uart, one of which is debug |
gpio interface | 40-way gpio (note: with multiplexing function, please check the pin definition in this specification) |
pwm interface | 12 pwm have 3.3v/1.8v level respectively (please check the pin definition in this specification) |
mipi camera interface | 2-way mipi csi camera interface (supports lvds format) |
voice output | 1 channel left channel output, backplane can be connected with power amplifier |
voice input | 1-way analog mic input |
sdio interface | 2 sdio interfaces, one tf card, the other can be connected to wifi |
adc interface | 2 adc interfaces (one upgrade port) |
i2c interface | 2-way i2c interface |
spi interface | 1-way spi interface |
Ethernet | one hundred megabit ethernet |
system upgrade | support for local usb upgrades |
hardware function | busybox linux 5.10.66 |
tcpy-c (5v power supply) | √ |
maskrom button (upgrade button) | √ |
recovery button | |
sdio ap6212 wifi | √ |
ethernet 10m/100m | √ |
SPK | √ |
mic (microphone) | √ |
DEBUG | √ |
UART3 | √ |
RTC | √ |
USB2.0 x2 | √ |
usb2.0 (pin) | √ |
4g module expansion | √ |
SIM | √ |
mipi csi (gc2093) | √ |
TF | √ |
nca9555 (gpio extension) | √ |
bus driver | |
adc driver | √ |
pwm driver | √ |
sdio driver | √ |
gpio driver | √ |
usb driver | √ |
can driver | √ |
I2s drive | √ |
I2C drive | √ |
spi driver | √ |
Project | Minimum | Typical | Maximum | |
power supply parameters | Voltage | 4.5 | 5V | 5.5V |
Ripple | -- | 50mV | ||
rtc (hym8563) | 0.3uA | 0.9uA | 1.2uA | |
current test with backplane | power-on current | 31mA | 62mA | 155mA |
desktop static current | 68mA | |||
environment | relative humidity | -- | 65% | 75% |
operating temperature | -10 ℃ | -- | 75 ℃ | |
storage temperature | -30 ℃ | -0 ℃ | 100 ℃ |
main hardware index | |
Size | 40mm length * 30mm width * 2.8mm height |
connection mode | stamp hole |
CPU | rockchip rv1103 mono-core a7+mcu |
NPU | 0.5 TOPS |
Memory | built-in ddr2 64mb |
storage device | standard 128mb for spi flash |
power management | design of discrete power supply |
working voltage | 3.4v-5.5v 400ma or above |
support system | linux5.10.66 |
operating temperature | -10 to + 75 degrees |
common interface of core board | |
usb interface | all the way to otg port |
uart serial port | 4-way uart, one of which is debug |
gpio interface | 40-way gpio (note: with multiplexing function, please check the pin definition in this specification) |
pwm interface | 12 pwm have 3.3v/1.8v level respectively (please check the pin definition in this specification) |
mipi camera interface | 2-way mipi csi camera interface (supports lvds format) |
voice output | 1 channel left channel output, backplane can be connected with power amplifier |
voice input | 1-way analog mic input |
sdio interface | 2 sdio interfaces, one tf card, the other can be connected to wifi |
adc interface | 2 adc interfaces (one upgrade port) |
i2c interface | 2-way i2c interface |
spi interface | 1-way spi interface |
Ethernet | one hundred megabit ethernet |
system upgrade | support for local usb upgrades |
hardware function | busybox linux 5.10.66 |
tcpy-c (5v power supply) | √ |
maskrom button (upgrade button) | √ |
recovery button | |
sdio ap6212 wifi | √ |
ethernet 10m/100m | √ |
SPK | √ |
mic (microphone) | √ |
DEBUG | √ |
UART3 | √ |
RTC | √ |
USB2.0 x2 | √ |
usb2.0 (pin) | √ |
4g module expansion | √ |
SIM | √ |
mipi csi (gc2093) | √ |
TF | √ |
nca9555 (gpio extension) | √ |
bus driver | |
adc driver | √ |
pwm driver | √ |
sdio driver | √ |
gpio driver | √ |
usb driver | √ |
can driver | √ |
I2s drive | √ |
I2C drive | √ |
spi driver | √ |
Project | Minimum | Typical | Maximum | |
power supply parameters | Voltage | 4.5 | 5V | 5.5V |
Ripple | -- | 50mV | ||
rtc (hym8563) | 0.3uA | 0.9uA | 1.2uA | |
current test with backplane | power-on current | 31mA | 62mA | 155mA |
desktop static current | 68mA | |||
environment | relative humidity | -- | 65% | 75% |
operating temperature | -10 ℃ | -- | 75 ℃ | |
storage temperature | -30 ℃ | -0 ℃ | 100 ℃ |