CPU BLOCK DIAGRAM
CORE BOARD BLOCK DIAGRAM
PRODUCT DISPLAY
HARDWARE INDEX
| size | L70mm x W60mm x H5.2mm |
| CPU | Rockchip RK3399pro six core frequency 1.8GHz |
| NPU | 3.0TOPs computing power |
| GPU | Mali-T860 MP4 GPU |
| CPU memory | LDDR4 standard 2G (4G batch optional) |
| NPU memory | LDDR3 standard 1G (2G batch optional) |
| memory | eMMC comes standard with 16G (8G/32G/64G batch optional) |
| power management | RK809-3 supports standby, key switch |
| Operating Voltage | The input voltage is 5V and the maximum power is less than 8W (without any peripherals) |
| support system | Support 5 major operating systems Android 9.0/Linux+QT5.9/Ubuntu16.04/Debian9/Fedora28 |
| operating temperature | -10 to +75 degrees |
| life | Continuous operation life is more than 3 years |
COMMONINTERFACE
| USB interface | 4 independent USB ports, two USB3.0, two USB2.0 |
| UART serial port | 5-way TTL 3.3V level, one of which is Debug |
| GPIO interface | 40 GPIOs (Note: there is multiplexing function, please check the relevant schematic diagram) |
| PWM interface | 3-way PWM 3.3V level |
| MIPI DSI display | 2-channel MIPI DSI can support dual-channel, and can also be split into two single-channel |
| eDP display | Support eDP1.3 4-wire 10.8Gbps |
| HDMI display | 1ch HDMI output 1920x1080 1080P 60fps |
| camera interface | 1 channel 8-bit parallel DVP camera interface |
| camera interface | 2 MIPI CSI supports dual ISP input up to 13MPix/s |
| voice output | 1 channel left and right channel output, 10W power amplifier attached to the bottom plate |
| Voice input | 1-way microphone input |
| SDIO interface | 2 SDIO interfaces, one TF card, the other connected to WIFI |
| IR infrared interface | 1 channel IR infrared receiving interface |
| ADC interface | 6-channel ADC interface |
| I2C interface | 5-way I2C interface |
| SPI interface | 4-way SPI interface |
| Ethernet | One GMAC PHY interface |
| I2S interface | Support 8-channel I2S interface output |
| PCIE interface | Support PCIe2.0 4full-duplex lanes |
| output power | Multi-channel power output 1.8V 2.8V 3.3V |
| System Upgrade | Support local USB upgrade |
CORRENT PARAMETER TABLE
| Project | Minimum | Typical | Maximum | |
| Power parameters | Voltage | 6.5V | 12V | 15V |
| Ripple | -- | 50mV | 100mV | |
| Electric current | 165mA | -- | -- | |
power supply current (no other peripherals connected) | Working current | 185mA | 298mA | 615mA |
| Play sound | 325mA | 321mA | 425mA | |
| Connect HDMI boot current | 345mA | 345mA | 635mA | |
power supply current (connect display screen) | MIPI 1024*600 | 265mA | 465mA | 656mA |
| Environmental Science | Relative humidity | -- | 65% | 75% |
| Working temperature | -10℃ | -- | 75℃ | |
| Storage temperature | -30℃ | -0℃ | 100℃ | |
CPU BLOCK DIAGRAM
CORE BOARD BLOCK DIAGRAM
PRODUCT DISPLAY
HARDWARE INDEX
| size | L70mm x W60mm x H5.2mm |
| CPU | Rockchip RK3399pro six core frequency 1.8GHz |
| NPU | 3.0TOPs computing power |
| GPU | Mali-T860 MP4 GPU |
| CPU memory | LDDR4 standard 2G (4G batch optional) |
| NPU memory | LDDR3 standard 1G (2G batch optional) |
| memory | eMMC comes standard with 16G (8G/32G/64G batch optional) |
| power management | RK809-3 supports standby, key switch |
| Operating Voltage | The input voltage is 5V and the maximum power is less than 8W (without any peripherals) |
| support system | Support 5 major operating systems Android 9.0/Linux+QT5.9/Ubuntu16.04/Debian9/Fedora28 |
| operating temperature | -10 to +75 degrees |
| life | Continuous operation life is more than 3 years |
COMMONINTERFACE
| USB interface | 4 independent USB ports, two USB3.0, two USB2.0 |
| UART serial port | 5-way TTL 3.3V level, one of which is Debug |
| GPIO interface | 40 GPIOs (Note: there is multiplexing function, please check the relevant schematic diagram) |
| PWM interface | 3-way PWM 3.3V level |
| MIPI DSI display | 2-channel MIPI DSI can support dual-channel, and can also be split into two single-channel |
| eDP display | Support eDP1.3 4-wire 10.8Gbps |
| HDMI display | 1ch HDMI output 1920x1080 1080P 60fps |
| camera interface | 1 channel 8-bit parallel DVP camera interface |
| camera interface | 2 MIPI CSI supports dual ISP input up to 13MPix/s |
| voice output | 1 channel left and right channel output, 10W power amplifier attached to the bottom plate |
| Voice input | 1-way microphone input |
| SDIO interface | 2 SDIO interfaces, one TF card, the other connected to WIFI |
| IR infrared interface | 1 channel IR infrared receiving interface |
| ADC interface | 6-channel ADC interface |
| I2C interface | 5-way I2C interface |
| SPI interface | 4-way SPI interface |
| Ethernet | One GMAC PHY interface |
| I2S interface | Support 8-channel I2S interface output |
| PCIE interface | Support PCIe2.0 4full-duplex lanes |
| output power | Multi-channel power output 1.8V 2.8V 3.3V |
| System Upgrade | Support local USB upgrade |
CORRENT PARAMETER TABLE
| Project | Minimum | Typical | Maximum | |
| Power parameters | Voltage | 6.5V | 12V | 15V |
| Ripple | -- | 50mV | 100mV | |
| Electric current | 165mA | -- | -- | |
power supply current (no other peripherals connected) | Working current | 185mA | 298mA | 615mA |
| Play sound | 325mA | 321mA | 425mA | |
| Connect HDMI boot current | 345mA | 345mA | 635mA | |
power supply current (connect display screen) | MIPI 1024*600 | 265mA | 465mA | 656mA |
| Environmental Science | Relative humidity | -- | 65% | 75% |
| Working temperature | -10℃ | -- | 75℃ | |
| Storage temperature | -30℃ | -0℃ | 100℃ | |
Product Show Case